Skip to content

Manual Ball Valve

STAINLESS STEEL HIGH PRESSURE 3PC BALL VALVE SCREW END WITH DIRECT MOUNT GBV350

The STAINLESS STEEL HIGH PRESSURE 3PC BALL VALVE SCREW END WITH DIRECT MOUNT GBV350 is a high-performance ball valve for shut-off and control applications with precision balls and seats.

Contact Sales

Product Overview

This ball valve provides reliable shut-off with a quarter-turn operation. The floating ball design ensures tight sealing with low operating torque, suitable for a wide range of industrial applications.

Product Features

  • Quarter-turn operation for quick control
  • Floating ball design for tight sealing
  • Low operating torque
  • Full port design for minimal pressure drop
  • Suitable for wide range of applications

Technical Specifications (For reference only. The actual parameters need to be verified with us).

ParameterValue / Unit
Product Type3-Piece Screwed Ball Valve
Model / SeriesGBV300 series
Size / Diameter1/4″–4″
Pressure Rating1000 PSI W.O.G (1/4"-4")
Process TemperatureUp to 180°C
Body MaterialStainless Steel CF8M (SS316)
Disc MaterialSS304 ball
Stem MaterialStainless Steel SS316
Seat MaterialPTFE reinforced
ConnectionThreaded NPT/BSPP ends
ActuationLever handle
Applicable MediumWater, oil, gas, air & steam
Applicable StandardAPI 607 fire-safe; ISO 5211 / DIN 3337
Design StandardThree-piece body, API 607 fire-safe
CertificationAPI 607 fire-safe; ISO 5211

FAQ

What is the difference between 1PC, 2PC, and 3PC ball valves?

1PC is one-piece body (lowest cost, not repairable inline); 2PC has two body halves (most common); 3PC has three pieces allowing inline maintenance without removing from line.

What seat materials are available?

PTFE (standard, 150°C), RPTFE (reinforced, higher pressure), PEEK (high temperature 250°C), and metal seats for severe service.

What is the difference between floating and trunnion ball?

Floating ball moves downstream under pressure for tight shutoff (small sizes); trunnion ball is fixed with spring-loaded seats (large sizes, high pressure).

Can ball valves be used for throttling?

Standard ball valves are for on/off service; V-port ball valves can be used for throttling/modulating control with appropriate actuator.

What does full port vs standard port mean?

Full port has bore equal to pipe ID (minimal pressure drop); standard port has reduced bore (smaller, lower cost, higher pressure drop).