Manual Ball Valve
STAINLESS STEEL HIGH PRESSURE 2PC BALL VALVE SCREW END GBV202
The STAINLESS STEEL HIGH PRESSURE 2PC BALL VALVE SCREW END GBV202 is a high-performance ball valve for shut-off and control applications with precision balls and seats.
Product Overview
This ball valve provides reliable shut-off with a quarter-turn operation. The floating ball design ensures tight sealing with low operating torque, suitable for a wide range of industrial applications.
Product Features
- Quarter-turn operation for quick control
- Floating ball design for tight sealing
- Low operating torque
- Full port design for minimal pressure drop
- Suitable for wide range of applications
Technical Specifications (For reference only. The actual parameters need to be verified with us).
| Parameter | Value / Unit |
|---|---|
| Product Type | Stainless steel 2-piece high-pressure ball valve |
| Model / Series | GBV202 |
| Size / Diameter | 1/4″–4″ |
| Pressure Rating | 2000 PSI W.O.G. |
| Process Temperature | Up to 180°C |
| Body Material | Stainless Steel CF8M (SS316) |
| Disc Material | SS304 ball |
| Stem Material | SS304 |
| Seat Material | PTFE reinforced |
| Connection | Threaded BSPT |
| Actuation | Lever handle |
| Applicable Medium | Water, oil, gas, air & steam |
| Applicable Standard | ISO 5211 mounting pad |
FAQ
What is the difference between 1PC, 2PC, and 3PC ball valves?
1PC is one-piece body (lowest cost, not repairable inline); 2PC has two body halves (most common); 3PC has three pieces allowing inline maintenance without removing from line.
What seat materials are available?
PTFE (standard, 150°C), RPTFE (reinforced, higher pressure), PEEK (high temperature 250°C), and metal seats for severe service.
What is the difference between floating and trunnion ball?
Floating ball moves downstream under pressure for tight shutoff (small sizes); trunnion ball is fixed with spring-loaded seats (large sizes, high pressure).
Can ball valves be used for throttling?
Standard ball valves are for on/off service; V-port ball valves can be used for throttling/modulating control with appropriate actuator.
What does full port vs standard port mean?
Full port has bore equal to pipe ID (minimal pressure drop); standard port has reduced bore (smaller, lower cost, higher pressure drop).

















