Skip to content

Manual Ball Valve

2PC BALL VALVE FLANGES PN16 GBV2-F00

The 2PC BALL VALVE FLANGES PN16 GBV2-F00 is a high-performance ball valve for shut-off and control applications with precision balls and seats.

Contact Sales

Product Overview

This ball valve provides reliable shut-off with a quarter-turn operation. The floating ball design ensures tight sealing with low operating torque, suitable for a wide range of industrial applications.

Product Features

  • Quarter-turn operation for quick control
  • Floating ball design for tight sealing
  • Low operating torque
  • Full port design for minimal pressure drop
  • Suitable for wide range of applications

Technical Specifications (For reference only. The actual parameters need to be verified with us).

ParameterValue / Unit
Product TypeQuarter-turn Electric Actuator (On/Off)
Model / SeriesGVA000 (GVA003~GVA200)
Torque Range50~1000 Nm
Ambient Temperature-25°C ~ +60°C
Stem MaterialAlloy steel shaft/adaptor
ConnectionISO 5211 mounting flange
Actuation / OperationElectric motor (on/off), manual handwheel override
Applicable StandardsISO 5211
Design StandardISO 5211 mounting
Mounting StandardISO 5211 mounting flange
CertificationCE, ISO 9001
Protection ClassIP67, NEMA 4/6
Housing MaterialAluminum alloy housing
Output Angle90°±1° (270° optional)
Power Supply110-120V / 220-240VAC (380V, AC/DC24V optional)

FAQ

What is the difference between 1PC, 2PC, and 3PC ball valves?

1PC is one-piece body (lowest cost, not repairable inline); 2PC has two body halves (most common); 3PC has three pieces allowing inline maintenance without removing from line.

What seat materials are available?

PTFE (standard, 150°C), RPTFE (reinforced, higher pressure), PEEK (high temperature 250°C), and metal seats for severe service.

What is the difference between floating and trunnion ball?

Floating ball moves downstream under pressure for tight shutoff (small sizes); trunnion ball is fixed with spring-loaded seats (large sizes, high pressure).

Can ball valves be used for throttling?

Standard ball valves are for on/off service; V-port ball valves can be used for throttling/modulating control with appropriate actuator.

What does full port vs standard port mean?

Full port has bore equal to pipe ID (minimal pressure drop); standard port has reduced bore (smaller, lower cost, higher pressure drop).