Metal-seated Ball Valve
TOP ENTRY BALL VALVE
The TOP ENTRY BALL VALVE is a high-performance ball valve for shut-off and control applications with precision balls and seats.
Product Overview
This ball valve provides reliable shut-off with a quarter-turn operation. The floating ball design ensures tight sealing with low operating torque, suitable for a wide range of industrial applications.
Product Features
- Quarter-turn operation for quick control
- Floating ball design for tight sealing
- Low operating torque
- Full port design for minimal pressure drop
- Suitable for wide range of applications
Technical Specifications (For reference only. The actual parameters need to be verified with us).
| Parameter | Value / Unit |
|---|---|
| Size | DN50-DN600 |
| Pressure | PN16-PN100, Class150-Class600 |
| Body | WCB/CF8/CF8M |
| Ball | SS316 with PTFE or metal seat |
| Standard | API 6D, API 608, GB/T 12237 |
| Design Standard | ISO 5211 / DIN 3337 |
| Face-to-Face Standard | EN 558 / API 609 |
| Flange Standard | EN 1092 / ANSI B16.5 |
| Testing Standard | API 598 / EN 12266 |
| Certification | CE, ISO 9001 |
| Protection Class | IP67 |
FAQ
What is the difference between 1PC, 2PC, and 3PC ball valves?
1PC is one-piece body (lowest cost, not repairable inline); 2PC has two body halves (most common); 3PC has three pieces allowing inline maintenance without removing from line.
What seat materials are available?
PTFE (standard, 150°C), RPTFE (reinforced, higher pressure), PEEK (high temperature 250°C), and metal seats for severe service.
What is the difference between floating and trunnion ball?
Floating ball moves downstream under pressure for tight shutoff (small sizes); trunnion ball is fixed with spring-loaded seats (large sizes, high pressure).
Can ball valves be used for throttling?
Standard ball valves are for on/off service; V-port ball valves can be used for throttling/modulating control with appropriate actuator.
What does full port vs standard port mean?
Full port has bore equal to pipe ID (minimal pressure drop); standard port has reduced bore (smaller, lower cost, higher pressure drop).

















