Skip to content

Manual Ball Valve

STAINLESS STEEL METAL SEATED TRUNNION BALL VALVE

The STAINLESS STEEL METAL SEATED TRUNNION BALL VALVE is a high-performance ball valve for shut-off and control applications with precision balls and seats.

Contact Sales

Product Overview

This ball valve provides reliable shut-off with a quarter-turn operation. The floating ball design ensures tight sealing with low operating torque, suitable for a wide range of industrial applications.

Product Features

  • Quarter-turn operation for quick control
  • Floating ball design for tight sealing
  • Low operating torque
  • Full port design for minimal pressure drop
  • Suitable for wide range of applications

Technical Specifications (For reference only. The actual parameters need to be verified with us).

ParameterValue / Unit
Size RangeDN50 - DN600 (2 inch - 24 inch)
Pressure RatingClass 150 - Class 900, PN16 - PN160
Body MaterialStainless Steel CF8M (SS316)
BallFixed (trunnion) stainless ball, hardened / stellite
SeatMetal (stellite / alloy) with secondary soft seal
StemStainless, anti-blow-out, anti-static device
End ConnectionFlanged ASME B16.5 / EN 1092-1
OperationGearbox; pneumatic or electric actuator optional
Process TemperatureUp to 425 C metal seated
Applicable MediaOil, gas, ash, particles, high-temperature process media
LeakageAPI 598 / metal seated tight shut-off
Standard DesignAPI 6D / EN / ANSI
Design & ManufacturingAPI 6D / API 608
Face-to-FaceASME B16.10 / API 6D
Flange DimensionsASME B16.5 / EN 1092-1
Fire TestAPI 607 / API 6FA
Inspection & TestAPI 598 / API 6D
Design StandardISO 5211 / DIN 3337
Face-to-Face StandardEN 558 / API 609
Flange StandardEN 1092 / ANSI B16.5
Testing StandardAPI 598 / EN 12266
CertificationCE, ISO 9001
Protection ClassIP67

FAQ

What is the difference between 1PC, 2PC, and 3PC ball valves?

1PC is one-piece body (lowest cost, not repairable inline); 2PC has two body halves (most common); 3PC has three pieces allowing inline maintenance without removing from line.

What seat materials are available?

PTFE (standard, 150°C), RPTFE (reinforced, higher pressure), PEEK (high temperature 250°C), and metal seats for severe service.

What is the difference between floating and trunnion ball?

Floating ball moves downstream under pressure for tight shutoff (small sizes); trunnion ball is fixed with spring-loaded seats (large sizes, high pressure).

Can ball valves be used for throttling?

Standard ball valves are for on/off service; V-port ball valves can be used for throttling/modulating control with appropriate actuator.

What does full port vs standard port mean?

Full port has bore equal to pipe ID (minimal pressure drop); standard port has reduced bore (smaller, lower cost, higher pressure drop).