Skip to content

Manual Ball Valve

STAINLESS STEEL V-PORT BALL VALVE

The STAINLESS STEEL V-PORT BALL VALVE is a high-performance ball valve for shut-off and control applications with precision balls and seats.

Contact Sales

Product Overview

This ball valve provides reliable shut-off with a quarter-turn operation. The floating ball design ensures tight sealing with low operating torque, suitable for a wide range of industrial applications.

Product Features

  • Quarter-turn operation for quick control
  • Floating ball design for tight sealing
  • Low operating torque
  • Full port design for minimal pressure drop
  • Suitable for wide range of applications

Technical Specifications (For reference only. The actual parameters need to be verified with us).

ParameterValue / Unit
Size RangeDN15 - DN200 (1/2 inch - 8 inch)
Pressure RatingPN16 / PN40, Class 150 - Class 300
Body MaterialStainless Steel CF8M (SS316)
Ball / TrimSS316 V-port segment ball, ground and lapped
SeatPTFE / RPTFE / reinforced PTFE
StemSS316, anti-blow-out design
End ConnectionFlanged EN1092-1 / ANSI B16.5; threaded or wafer optional
OperationLever handle / gearbox; pneumatic or electric optional
Flow CharacteristicEqual percentage / modified equal percentage
Process Temperature-20 C to +180 C (PTFE seat)
Shut-off LeakageFCI 70-2 Class IV / V
Applicable MediaWater, steam, oil, slurry, fibre-containing media
Design & ManufacturingEN 12266 / API 608
Face-to-FaceEN 558 / ASME B16.10
Flange DimensionsEN 1092-1 / ASME B16.5
Inspection & TestAPI 598 / EN 12266-1
MarkingEN 19 / MSS SP-25
Design StandardISO 5211 / DIN 3337
Face-to-Face StandardEN 558 / API 609
Flange StandardEN 1092 / ANSI B16.5
Testing StandardAPI 598 / EN 12266
CertificationCE, ISO 9001
Protection ClassIP67

FAQ

What is the difference between 1PC, 2PC, and 3PC ball valves?

1PC is one-piece body (lowest cost, not repairable inline); 2PC has two body halves (most common); 3PC has three pieces allowing inline maintenance without removing from line.

What seat materials are available?

PTFE (standard, 150°C), RPTFE (reinforced, higher pressure), PEEK (high temperature 250°C), and metal seats for severe service.

What is the difference between floating and trunnion ball?

Floating ball moves downstream under pressure for tight shutoff (small sizes); trunnion ball is fixed with spring-loaded seats (large sizes, high pressure).

Can ball valves be used for throttling?

Standard ball valves are for on/off service; V-port ball valves can be used for throttling/modulating control with appropriate actuator.

What does full port vs standard port mean?

Full port has bore equal to pipe ID (minimal pressure drop); standard port has reduced bore (smaller, lower cost, higher pressure drop).