Manual Butterfly Valve
PNEUMATIC HARD SEAL BUTTERFLY VALVE
The PNEUMATIC HARD SEAL BUTTERFLY VALVE is a resilient-seated butterfly valve for on/off and throttling service with low torque operation.
Product Overview
This butterfly valve provides reliable shut-off and control with a compact, lightweight design. The disc rotates 90 degrees for quick operation, suitable for a wide range of industrial applications including water treatment, HVAC and chemical processing.
Product Features
- Compact, lightweight design
- Quarter-turn operation for quick control
- Low pressure drop and high flow capacity
- Reliable sealing with replaceable seat
- Suitable for wide range of media and temperatures
Technical Specifications (For reference only. The actual parameters need to be verified with us).
| Parameter | Value / Unit |
|---|---|
| Size Range | DN50 - DN600 (2 inch - 24 inch) |
| Pressure Rating | PN16 / ANSI 150# |
| Body Material | Cast Iron GGG40 / Ductile iron |
| Disc | Stainless steel, hardened or nickel-treated |
| Seat | Metal (stainless / stellite), multi-layer optional |
| Actuator Type | Rack-and-pinion pneumatic, double / spring return |
| Supply Air | 0.4 - 0.7 MPa clean dry air |
| End Connection | Wafer / lug / flanged |
| Control | On/off; optional 4~20mA positioner |
| Process Temperature | -29°C ~ +425°C (metal seat) |
| Leakage | API 598 / FCI 70-2 Class V / metal seated |
| Standard Design | API 609 / EN 593 |
| Design & Manufacturing | API 609 / EN 593 |
| Face-to-Face | API 609 / EN 558 |
| Actuator Mounting | ISO 5211 |
| Fire Test | API 607 |
| Inspection & Test | API 598 / EN 12266 |
| Design Standard | ISO 5211 / DIN 3337 |
| Face-to-Face Standard | EN 558 / API 609 |
| Flange Standard | EN 1092 / ANSI B16.5 |
| Testing Standard | API 598 / EN 12266 |
| Certification | CE, ISO 9001 |
| Protection Class | IP67 |
FAQ
What is the difference between centerline and eccentric butterfly valves?
Centerline (concentric) valves have the disc centered on the stem; eccentric (double/triple offset) valves reduce seat wear and provide tighter shutoff for high-pressure service.
What seat materials are available?
Standard EPDM for water service, NBR for oil, PTFE for chemical resistance, and metal seats for high-temperature and abrasive applications.
What is the difference between wafer and lug style?
Wafer style fits between flanges with through-bolts; lug style has threaded inserts allowing removal from one side without disassembling the entire line.
Can butterfly valves be used for throttling?
Yes, but typically limited to 20-80% open range; prolonged operation near closed position may cause seat wear and cavitation.
What torque is required for operation?
Torque varies by size, pressure, and seat material; consult sizing charts for actuator selection; gear operators recommended for DN200 and above.


















