Skip to content

Manual Butterfly Valve

CAST IRON BODY STAINLESS STEEL DISC EPDM SEAT WAFER BUTTERFLY VALVE WITH LEVER

The CAST IRON BODY STAINLESS STEEL DISC EPDM SEAT WAFER BUTTERFLY VALVE WITH LEVER is a resilient-seated butterfly valve for on/off and throttling service with low torque operation.

Contact Sales

Product Overview

This butterfly valve provides reliable shut-off and control with a compact, lightweight design. The disc rotates 90 degrees for quick operation, suitable for a wide range of industrial applications including water treatment, HVAC and chemical processing.

Product Features

  • Compact, lightweight design
  • Quarter-turn operation for quick control
  • Low pressure drop and high flow capacity
  • Reliable sealing with replaceable seat
  • Suitable for wide range of media and temperatures

Technical Specifications (For reference only. The actual parameters need to be verified with us).

ParameterValue / Unit
Product TypeWafer Butterfly Valve (Lever Operated, EPDM Seat)
Model / SeriesGBF2-000
Size / ConnectionDN40 - DN300 (1-1/2" - 12")
Pressure Rating16 bar (PN10/16) up to DN300
Process TemperatureEPDM seat: -15 to +110°C
Body MaterialCast Iron / Ductile Iron GGG40
Disc MaterialCF8 (SS304)
Stem MaterialSS420
Seat MaterialEPDM
ConnectionWafer type, EN1092-1 PN10/16, JIS 10K, ANSI 125/150
Actuation / OperationLever (handle)
Applicable MediaHot/cold water, air, mild chemicals
Applicable StandardsBS EN593 / API 609
Design StandardBS EN593 / API 609
Face-to-Face StandardBS EN558-1 / API 609
Flange StandardEN1092-1 PN10/16, JIS B2210 10K, DIN 2501, ANSI B16.1 125/150
Testing StandardBS EN 12266-1 / API 598
CertificationCE, ISO 9001
Protection ClassIP67

FAQ

What is the difference between centerline and eccentric butterfly valves?

Centerline (concentric) valves have the disc centered on the stem; eccentric (double/triple offset) valves reduce seat wear and provide tighter shutoff for high-pressure service.

What seat materials are available?

Standard EPDM for water service, NBR for oil, PTFE for chemical resistance, and metal seats for high-temperature and abrasive applications.

What is the difference between wafer and lug style?

Wafer style fits between flanges with through-bolts; lug style has threaded inserts allowing removal from one side without disassembling the entire line.

Can butterfly valves be used for throttling?

Yes, but typically limited to 20-80% open range; prolonged operation near closed position may cause seat wear and cavitation.

What torque is required for operation?

Torque varies by size, pressure, and seat material; consult sizing charts for actuator selection; gear operators recommended for DN200 and above.