Skip to content

Safety Valve

STAINLESS STEEL MINI SAFETY VALVE GSV2M

The STAINLESS STEEL MINI SAFETY VALVE GSV2M is a reliable overpressure protection device designed to automatically discharge excess pressure and ensure system safety.

Contact Sales

Product Overview

This safety valve provides automatic overpressure protection for industrial equipment and piping systems. Designed to open at a predetermined pressure and safely discharge excess pressure to prevent system damage.

Product Features

  • Automatic overpressure protection
  • Set pressure adjustable
  • Reliable spring-loaded mechanism
  • Quick opening and reseating
  • Suitable for various industrial applications

Technical Specifications (For reference only. The actual parameters need to be verified with us).

ParameterValue / Unit
Product TypeQuarter-turn Electric Actuator (On/Off)
Model / SeriesGVA000 (GVA003~GVA200)
Torque Range50~1000 Nm
Ambient Temperature-25°C ~ +60°C
Stem MaterialAlloy steel shaft/adaptor
ConnectionISO 5211 mounting flange
Actuation / OperationElectric motor (on/off), manual handwheel override
Applicable StandardsISO 5211
Design StandardISO 5211 mounting
Mounting StandardISO 5211 mounting flange
CertificationCE, ISO 9001
Protection ClassIP67, NEMA 4/6
Housing MaterialAluminum alloy housing
Output Angle90°±1° (270° optional)
Power Supply110-120V / 220-240VAC (380V, AC/DC24V optional)

FAQ

What is the difference between safety valve and relief valve?

Safety valves pop open at set pressure (gas/vapor service); relief valves open proportionally (liquid service); safety relief valves handle both.

How is the set pressure determined?

Set pressure is typically 10% above maximum operating pressure or as required by code; must not exceed equipment design pressure.

What is blowdown (reseat pressure)?

Blowdown is the pressure difference between set pressure and reseat pressure, expressed as % of set pressure; typically 2-15% depending on design.

Can safety valves be used for liquid service?

Yes, safety relief valves are designed for both compressible and incompressible fluids; ensure correct orifice sizing for your medium.

How often should safety valves be tested?

Annually or per local regulations; test by lifting the test lever (if equipped) or bench testing for set pressure and seal tightness.